150mm Hook & Loop Sanding Disc (6") — 6 Hole, Dust Extraction

150mm hook and loop sanding disc with 6 dust-extraction holes, for orbital and dual-action sanders. Industrial-quality aluminium oxide grain on a hook and loop (grip) backing — press the disc onto your sander pad, sand, then peel it off to change grit in seconds. The 6 holes pull dust off the surface and through the pad to your extractor, for a cleaner cut and a clearer view of the work.

Match the holes to your pad
Dust extraction only works if the disc holes line up with the holes in your backing pad. This is the 6-hole 150mm disc — check your sander pad is also 150mm with a 6-hole pattern before ordering. For an 8-hole machine, choose our 125mm 8-hole disc instead.

Choosing a grit
40 (coarse) for stripping paint and heavy stock removal. 80 and 120 (medium) for general sanding and smoothing. 180 (fine) and 320 (very fine) for finishing and flatting between coats. Working down through the grits gives a better finish than jumping straight to fine.

Size
150mm diameter (6"), 6 dust-extraction holes

Backing
Hook and loop (grip) backing

Abrasive
Aluminium oxide

Materials
Wood, metal, plastic, fibreglass, paint and filler

Uses
Preparing and finishing wood, flatting paint, filler and primer on bodywork, and general orbital sanding with dust extraction.

Fits
Any 150mm orbital or DA sander with a 6-hole hook and loop pad. Needs a hook and loop backing pad — if yours is worn or you are missing one, see our backing pads.

Also known as 6 inch sanding disc, 6 hole sanding disc, hook and loop disc, grip disc, Velcro-type sanding disc or DA sander disc.