100mm x 6mm Metal Grinding Disc (4") — Abracs Depressed Centre

Abracs 100mm x 6mm metal grinding disc with a depressed centre, for grinding down welds, burrs, sharp edges and surface rust on a 4 inch angle grinder. At 6mm thick it is built to be worked on its face — the depressed centre lets you hold the grinder at a shallow angle to the workpiece and take material off steadily without the locknut fouling the surface.

Size
100mm x 6mm thick x 16mm bore (4")

Brand
Abracs

Construction
Aluminium oxide, resin bonded, fibreglass reinforced

Standard
Manufactured to EN 12413

Maximum speed
15,200 RPM

Uses
Dressing back welds, removing weld spatter and burrs, chamfering edges, cleaning up cut ends, and taking off rust or old weld before refinishing. For mild steel, iron, sheet steel and high grade steel.

Fits
16mm (5/8") bore. Check your grinder takes a 5/8" arbor before ordering, as some 100mm grinders are fitted for 22mm discs instead.

Also known as 4 inch grinding disc, 100mm grinding wheel, metal grinding disc or DPC grinding disc.