125mm x 6mm Metal Grinding Disc (5") — Abracs Proflex DPC

Abracs Proflex 125mm x 6mm metal grinding disc with a depressed centre, for grinding down welds, burrs, sharp edges and surface rust on a 5 inch angle grinder. A wider working face than the 115mm on the same 22mm bore, so it covers ground faster on flat work. At 6mm thick it is built to be worked on its face — the depressed centre lets you hold the grinder at a shallow angle to the workpiece and take material off steadily without the locknut fouling the surface.

Size
125mm x 6mm thick x 22mm bore (5")

Brand
Abracs Proflex

Type
F27 depressed centre grinding disc

Construction
Aluminium oxide, resin bonded, fibreglass reinforced

Standard
Manufactured to EN 12413

Maximum speed
12,200 RPM

Materials
Mild steel, iron, sheet steel and high grade steel

Uses
Dressing back welds, removing weld spatter and burrs, chamfering edges, cleaning up cut ends, and taking off rust or old weld before refinishing.

Fits
Standard 22mm bore, fits most 5 inch angle grinders.

Also known as 5 inch grinding disc, 125mm grinding wheel, metal grinding disc, DPC grinding disc or F27 grinding disc.