50 x 30mm Flap Wheel — 6mm Shank, Abracs Spindle Mounted

Abracs 50 x 30mm spindle mounted flap wheel on a 6mm shank, for deburring, blending and finishing in a drill or die grinder. The mid-range size and the general-purpose choice, wide enough to cover ground on flat and curved work without losing the ability to get into a corner. Overlapping abrasive flaps flex to follow the contour of the workpiece rather than flattening it, and wear away as you go to keep exposing fresh grit.

This is not an angle grinder disc
Spindle mounted flap wheels fit a drill or die grinder chuck. If you are after a flap disc for an angle grinder, see our zirconium flap discs instead.

Choosing a grit
40 (coarse) for stock removal and heavy rust or scale. 60 (medium) for general deburring and cleaning up. 80 for blending and pre-finish work. 120 (fine) for final finishing and satin surfaces.

Size
50mm diameter x 30mm wide

Shank
6mm steel shank, running through the wheel for balance

Brand
Abracs

Abrasive
Aluminium oxide on a flexible cloth backing

Materials
Mild steel, stainless steel, aluminium, brass, bronze and hard plastics

Uses
Deburring, weld cleaning and blending, removing rust, scale and old paint, tube and pipe finishing, and putting a satin finish on metal.

Fits
Any drill or die grinder taking a 6mm shank. Clamp at least 15mm of the shank in the chuck.

Also known as spindle mounted flap wheel, mounted flap wheel, shaft mounted flap wheel, rotary flap wheel or abrasive sanding wheel.