230mm x 1.8mm Stainless Steel & Metal Cutting Disc (9") — Abracs Proflex INOX

Abracs Proflex 230mm x 1.8mm INOX cutting disc for fast, deep cuts through stainless steel and mild steel on a 9 inch angle grinder. At 1.8mm it is a little thicker than the 1mm discs in the smaller sizes — the extra body is what lets a disc this large run safely at full diameter — but it still cuts far faster and with less effort than a 3mm disc, removing less material and leaving a cleaner edge with minimal burr.

Stainless steel safe
Contains no iron, sulphur or chlorine, so the disc will not contaminate stainless steel and cause it to rust after cutting. Suitable for use in the petrochemical, nuclear and food industries where contamination control matters.

Size
230mm x 1.8mm thick x 22mm bore (9")

Brand
Abracs Proflex

Grade
A60TBF

Construction
Aluminium oxide, resin bonded, fibreglass reinforced

Standard
Manufactured to EN 12413

Maximum speed
6,600 RPM

Uses
Cutting stainless and mild steel plate, large box section, scaffold tube and heavy stock where a clean, contamination-free edge and a fast cut matter more than disc life.

Fits
Standard 22mm bore, fits most 9 inch angle grinders.

Also known as inox cutting disc, stainless steel cutting disc, 9 inch thin cutting disc, slitting disc or 230mm cut-off wheel.