100mm x 3mm Metal Cutting Disc (4") — Abracs Depressed Centre

Abracs 100mm x 3mm metal cutting disc with a depressed centre, for fast, straight cuts through mild steel, iron and sheet steel on a 4 inch angle grinder. The depressed centre keeps the grinder's locknut clear of the workpiece so you can cut flush or into tight angles. At 3mm thick this is the standard-duty disc — tougher and longer-lasting on repeated heavy cuts than a thin disc. For faster, cleaner cuts, or for work on stainless steel, see our 100mm extra thin cutting disc.

Size
100mm x 3.0mm thick x 16mm bore (4 x 1/8 x 5/8")

Brand
Abracs Proflex

Construction
Aluminium oxide, resin bonded, fibreglass reinforced

Grade
A30RBF

Standard
Manufactured to EN 12413, MPA certified

Maximum speed
15,300 RPM / 80 m/s

Uses
Cutting mild steel, iron, sheet steel and high-grade steel — steel bar, box section, angle iron, bolts, rebar and sheet metal.

Fits
16mm (5/8") bore. Check your grinder takes a 5/8" arbor before ordering — some 100mm grinders are fitted for 22mm discs instead.

Also known as 4 inch cutting disc, 100mm chop disc, angle grinder cutting wheel or DPC cutting disc.