475pc Assorted Pop Rivets Box - Aluminium 3.2-4.8mm, Plus Washers

475pc Assorted Box of Pop Rivets - 375 aluminium blind rivets in seven sizes from 3.2mm to 4.8mm diameter, in both plain dome head and large flange, together with 100 backing washers.

A blind rivet is set from one side only. The mandrel is pulled until the body swells out behind the panel and the stem snaps off, so a joint can be made where there is no access to the back at all. Large flange heads spread the load on thin or soft material where a plain dome head would pull through, and the backing washers do the same job from the blind side.

Box contents (475 pieces total)
100 x 3.2 x 8mm plain dome head
100 x 3.2 x 12mm plain dome head
50 x 4.0 x 10mm plain dome head
50 x 4.8 x 18.7mm plain dome head
25 x 4.8 x 12mm large flange
25 x 4.8 x 18.7mm large flange
25 x 4.8 x 25mm large flange
100 x backing washers, 1/8" bore x 1/2" outside diameter

Type
Blind rivet (pop rivet), aluminium, plain dome head and large flange

Please note
A rivet gun is needed to set these. Aluminium rivets suit general sheet and panel work rather than structural or high load joints.

Suitable for
Panel and bodywork repairs, trailers and horseboxes, guttering, cladding and ducting, van racking and shelving, signage and trim, general sheet metal fabrication

Also known as blind rivets, pop rivets, aluminium rivets, dome head rivets, large flange rivets, or a pop rivet assortment box.