{"title":"Depressed Centre Cutting Discs","description":"\u003cp\u003e\u003cstrong\u003eDepressed centre cutting discs\u003c\/strong\u003e in 3mm thickness, from 100mm to 230mm, for cutting mild steel, iron and sheet steel with an angle grinder. Abracs, aluminium oxide, resin bonded and fibreglass reinforced, manufactured to EN 12413.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat the depressed centre does\u003c\/strong\u003e\u003cbr\u003eThe centre of the disc is recessed, so the grinder's locknut sits below the level of the cutting face. That clearance lets you cut flush to a surface and work into tighter angles than a flat disc allows — useful on anything fixed in place, like cutting a bolt back to a bracket or trimming steel already welded up.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy 3mm\u003c\/strong\u003e\u003cbr\u003eThe standard-duty thickness. A 3mm disc cuts more slowly than a thin disc and takes out more material, but it carries far more body, so it stands up to repeated heavy cutting and lasts longer on thick stock. The disc to reach for on steel bar, box section, angle iron, scaffold tube and rebar. For faster, cleaner cutting or work on stainless steel, see our extra thin cutting discs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing a size\u003c\/strong\u003e\u003cbr\u003eMatch the disc to your grinder, never the other way round. 100mm (4\"), 115mm (4.5\") and 125mm (5\") suit standard handheld grinders; 180mm (7\") and 230mm (9\") need a large two-handed grinder. Larger discs cut deeper but run at lower maximum speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChecking the bore\u003c\/strong\u003e\u003cbr\u003eThe 115mm, 125mm, 180mm and 230mm discs use a standard 22mm bore. The 100mm disc has a 16mm (5\/8\") bore — check what your grinder takes before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003cbr\u003eNever exceed the maximum RPM printed on the disc, and check your grinder's rated speed is at or below it. These are cutting discs only — never use the face for grinding, as side loading can shatter the disc. Use a guard, eye protection and a dust mask.\u003c\/p\u003e\n\u003cp\u003eAlso known as chop discs, DPC cutting discs, type 42 cutting discs, angle grinder discs or metal cutting wheels.\u003c\/p\u003e","products":[{"product_id":"100mm-3mm-metal-cutting-disc","title":"100mm x 3mm Metal Cutting Disc (4\") — Abracs Depressed Centre","description":"\u003cp\u003e\u003cstrong\u003eAbracs 100mm x 3mm metal cutting disc\u003c\/strong\u003e with a depressed centre, for fast, straight cuts through mild steel, iron and sheet steel on a 4 inch angle grinder. The depressed centre keeps the grinder's locknut clear of the workpiece so you can cut flush or into tight angles. At 3mm thick this is the standard-duty disc — tougher and longer-lasting on repeated heavy cuts than a thin disc. For faster, cleaner cuts, or for work on stainless steel, see our 100mm extra thin cutting disc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e100mm x 3.0mm thick x 16mm bore (4 x 1\/8 x 5\/8\")\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003cbr\u003eAbracs Proflex\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003eAluminium oxide, resin bonded, fibreglass reinforced\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrade\u003c\/strong\u003e\u003cbr\u003eA30RBF\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003cbr\u003eManufactured to EN 12413, MPA certified\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum speed\u003c\/strong\u003e\u003cbr\u003e15,300 RPM \/ 80 m\/s\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003eCutting mild steel, iron, sheet steel and high-grade steel — steel bar, box section, angle iron, bolts, rebar and sheet metal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003e16mm (5\/8\") bore. Check your grinder takes a 5\/8\" arbor before ordering — some 100mm grinders are fitted for 22mm discs instead.\u003c\/p\u003e\n\u003cp\u003eAlso known as 4 inch cutting disc, 100mm chop disc, angle grinder cutting wheel or DPC cutting disc.\u003c\/p\u003e","brand":"DH \u0026 JS Trading Ltd","offers":[{"title":"100mm \/ 1","offer_id":57101068304762,"sku":"EMC1 x1","price":3.99,"currency_code":"GBP","in_stock":true},{"title":"100mm \/ 2","offer_id":57101068337530,"sku":"EMC1 x2","price":4.99,"currency_code":"GBP","in_stock":true},{"title":"100mm \/ 3","offer_id":57101068370298,"sku":"EMC1 x3","price":6.99,"currency_code":"GBP","in_stock":true},{"title":"100mm \/ 5","offer_id":57101068403066,"sku":"EMC1 x5","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"100mm \/ 10","offer_id":57101068435834,"sku":"EMC1 x10","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2239\/6850\/files\/3mmCuttingDiscs.jpg?v=1764940103"},{"product_id":"115mm-3mm-metal-cutting-disc","title":"115mm x 3mm Metal Cutting Disc (4.5\") — Abracs Depressed Centre","description":"\u003cp\u003e\u003cstrong\u003eAbracs 115mm x 3mm metal cutting disc\u003c\/strong\u003e with a depressed centre, for fast, straight cuts through mild steel, iron and sheet steel on a 4.5 inch angle grinder — the most common grinder size on site and in the workshop. The depressed centre keeps the grinder's locknut clear of the workpiece so you can cut flush or into tight angles. At 3mm thick this is the standard-duty disc — tougher and longer-lasting on repeated heavy cuts than a thin disc. For faster, cleaner cuts, or for work on stainless steel, see our 115mm extra thin INOX cutting disc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e115mm x 3.0mm thick x 22mm bore\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003cbr\u003eAbracs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003eAluminium oxide, resin bonded, fibreglass reinforced\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003cbr\u003eManufactured to EN 12413\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum speed\u003c\/strong\u003e\u003cbr\u003e13,200 RPM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003eCutting mild steel, iron, sheet steel and high-grade steel — steel bar, box section, angle iron, bolts, rebar and sheet metal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eStandard 22mm bore, fits most 4.5 inch angle grinders.\u003c\/p\u003e\n\u003cp\u003eAlso known as 4.5 inch cutting disc, 115mm chop disc, angle grinder cutting wheel or DPC cutting disc.\u003c\/p\u003e","brand":"DH \u0026 JS Trading Ltd","offers":[{"title":"115mm \/ 1","offer_id":57101245251962,"sku":"EMC2 x1","price":3.99,"currency_code":"GBP","in_stock":true},{"title":"115mm \/ 2","offer_id":57101245284730,"sku":"EMC2 x2","price":4.99,"currency_code":"GBP","in_stock":true},{"title":"115mm \/ 3","offer_id":57101245317498,"sku":"EMC2 x3","price":6.99,"currency_code":"GBP","in_stock":true},{"title":"115mm \/ 5","offer_id":57101245350266,"sku":"EMC2 x5","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"115mm \/ 10","offer_id":57101245383034,"sku":"EMC2 x10","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2239\/6850\/files\/3mmCuttingDiscs.jpg?v=1764940103"},{"product_id":"125mm-3mm-metal-cutting-disc","title":"125mm x 3mm Metal Cutting Disc (5\") — Abracs Depressed Centre","description":"\u003cp\u003e\u003cstrong\u003eAbracs 125mm x 3mm metal cutting disc\u003c\/strong\u003e with a depressed centre, for fast, straight cuts through mild steel, iron and sheet steel on a 5 inch angle grinder. A step up in cutting depth from the 115mm disc, using the same 22mm bore. The depressed centre keeps the grinder's locknut clear of the workpiece so you can cut flush or into tight angles. At 3mm thick this is the standard-duty disc — tougher and longer-lasting on repeated heavy cuts than a thin disc. For faster, cleaner cuts, or for work on stainless steel, see our 125mm extra thin INOX cutting disc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e125mm x 3.0mm thick x 22mm bore\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003cbr\u003eAbracs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003eAluminium oxide, resin bonded, fibreglass reinforced\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003cbr\u003eManufactured to EN 12413\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum speed\u003c\/strong\u003e\u003cbr\u003e12,200 RPM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003eCutting mild steel, iron, sheet steel and high-grade steel — steel bar, box section, angle iron, bolts, rebar and sheet metal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eStandard 22mm bore, fits most 5 inch angle grinders.\u003c\/p\u003e\n\u003cp\u003eAlso known as 5 inch cutting disc, 125mm chop disc, angle grinder cutting wheel or DPC cutting disc.\u003c\/p\u003e","brand":"DH \u0026 JS Trading Ltd","offers":[{"title":"125mm \/ 1","offer_id":57101248135546,"sku":"EMC3 x1","price":4.29,"currency_code":"GBP","in_stock":true},{"title":"125mm \/ 2","offer_id":57101248168314,"sku":"EMC3 x2","price":5.49,"currency_code":"GBP","in_stock":true},{"title":"125mm \/ 3","offer_id":57101248201082,"sku":"EMC3 x3","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"125mm \/ 5","offer_id":57101248233850,"sku":"EMC3 x5","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"125mm \/ 10","offer_id":57101248266618,"sku":"EMC3 x10","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2239\/6850\/files\/3mmCuttingDiscs.jpg?v=1764940103"},{"product_id":"180mm-3mm-metal-cutting-disc","title":"180mm x 3mm Metal Cutting Disc (7\") — Abracs Depressed Centre","description":"\u003cp\u003e\u003cstrong\u003eAbracs 180mm x 3mm metal cutting disc\u003c\/strong\u003e with a depressed centre, for deep, straight cuts through mild steel, iron and sheet steel on a 7 inch angle grinder. The larger diameter gives the cutting depth for heavier stock than a 115mm or 125mm disc can reach. The depressed centre keeps the grinder's locknut clear of the workpiece so you can cut flush or into tight angles. At 3mm thick this is the standard-duty disc — tougher and longer-lasting on repeated heavy cuts than a thin disc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e180mm x 3.0mm thick x 22mm bore\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003cbr\u003eAbracs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003eAluminium oxide, resin bonded, fibreglass reinforced\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003cbr\u003eManufactured to EN 12413\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum speed\u003c\/strong\u003e\u003cbr\u003e8,600 RPM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003eCutting thicker steel stock — heavy box section, thick angle iron, steel plate, scaffold tube and rebar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eStandard 22mm bore, fits most 7 inch angle grinders.\u003c\/p\u003e\n\u003cp\u003eAlso known as 7 inch cutting disc, 180mm chop disc, angle grinder cutting wheel or DPC cutting disc.\u003c\/p\u003e","brand":"DH \u0026 JS Trading Ltd","offers":[{"title":"180mm \/ 1","offer_id":57101251150202,"sku":"EMC4 x1","price":4.99,"currency_code":"GBP","in_stock":true},{"title":"180mm \/ 2","offer_id":57101251182970,"sku":"EMC4 x2","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"180mm \/ 3","offer_id":57101251215738,"sku":"EMC4 x3","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"180mm \/ 5","offer_id":57101251248506,"sku":"EMC4 x5","price":15.99,"currency_code":"GBP","in_stock":true},{"title":"180mm \/ 10","offer_id":57101251281274,"sku":"EMC4 x10","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2239\/6850\/files\/3mmCuttingDiscs.jpg?v=1764940103"},{"product_id":"230mm-3mm-metal-cutting-disc","title":"230mm x 3mm Metal Cutting Disc (9\") — Abracs Depressed Centre","description":"\u003cp\u003e\u003cstrong\u003eAbracs 230mm x 3mm metal cutting disc\u003c\/strong\u003e with a depressed centre, for the deepest cuts through mild steel, iron and sheet steel on a 9 inch angle grinder — the largest disc in the range, for heavy fabrication and demolition cutting. The depressed centre keeps the grinder's locknut clear of the workpiece so you can cut flush or into tight angles. At 3mm thick this is the standard-duty disc — tougher and longer-lasting on repeated heavy cuts than a thin disc. For faster cuts, or for work on stainless steel, see our 230mm extra thin INOX cutting disc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e230mm x 3.0mm thick x 22mm bore\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003cbr\u003eAbracs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003eAluminium oxide, resin bonded, fibreglass reinforced\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003cbr\u003eManufactured to EN 12413\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum speed\u003c\/strong\u003e\u003cbr\u003e6,600 RPM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003eHeavy cutting — steel plate, large box section, scaffold tube, railway and demolition work, and stock too deep for smaller grinders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eStandard 22mm bore, fits most 9 inch angle grinders.\u003c\/p\u003e\n\u003cp\u003eAlso known as 9 inch cutting disc, 230mm chop disc, angle grinder cutting wheel or DPC cutting disc.\u003c\/p\u003e","brand":"DH \u0026 JS Trading Ltd","offers":[{"title":"230mm \/ 1","offer_id":57101253181818,"sku":"EMC5 x1","price":5.99,"currency_code":"GBP","in_stock":true},{"title":"230mm \/ 2","offer_id":57101253214586,"sku":"EMC5 x2","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"230mm \/ 3","offer_id":57101253247354,"sku":"EMC5 x3","price":13.99,"currency_code":"GBP","in_stock":true},{"title":"230mm \/ 5","offer_id":57101253280122,"sku":"EMC5 x5","price":18.99,"currency_code":"GBP","in_stock":true},{"title":"230mm \/ 10","offer_id":57101253312890,"sku":"EMC5 x10","price":31.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2239\/6850\/files\/3mmCuttingDiscs.jpg?v=1764940103"}],"url":"https:\/\/www.dhjstrading.com\/collections\/depressed-centre-cutting-discs.oembed","provider":"DH \u0026 JS Trading Ltd","version":"1.0","type":"link"}