{"title":"Cutting Discs","description":"\u003cp\u003e\u003cstrong\u003eMetal and stainless steel cutting discs for angle grinders\u003c\/strong\u003e, from 75mm mini cut-off wheels up to 230mm discs for heavy fabrication. All Abracs, aluminium oxide, resin bonded and fibreglass reinforced, manufactured to EN 12413.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDepressed centre cutting discs\u003c\/strong\u003e\u003cbr\u003eThe standard-duty 3mm disc, 100mm to 230mm. Tough and long-lasting on repeated heavy cutting, with a recessed centre that lets you cut flush to a surface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExtra thin cutting discs\u003c\/strong\u003e\u003cbr\u003e1mm Abracs Proflex INOX discs for stainless steel and mild steel. Faster, cleaner cuts with minimal burr and less heat.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMini cut-off wheels\u003c\/strong\u003e\u003cbr\u003e75mm wheels with a 10mm bore for air cut-off tools and mini angle grinders, in 1mm, 1.6mm and 2mm. For confined spaces a full-size grinder cannot reach.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing a size\u003c\/strong\u003e\u003cbr\u003eMatch the disc to your grinder, never the other way round. 100mm (4\"), 115mm (4.5\") and 125mm (5\") suit standard handheld grinders; 180mm (7\") and 230mm (9\") are for large two-handed grinders. Larger discs cut deeper but run at lower maximum speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChecking the bore\u003c\/strong\u003e\u003cbr\u003eMost discs use a standard 22mm bore. Our 100mm discs have a 16mm (5\/8\") bore and our 75mm mini wheels a 10mm bore — check what your tool takes before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafety\u003c\/strong\u003e\u003cbr\u003eNever exceed the maximum RPM printed on the disc, and always check your grinder's rated speed is at or below it. Cutting discs are for cutting only — never use the face of a cutting disc for grinding, as side loading can shatter the disc. Use a guard, eye protection and a dust mask.\u003c\/p\u003e\n\u003cp\u003eAlso known as chop discs, angle grinder discs, cut-off wheels, inox discs, stainless steel cutting discs, metal cutting wheels or slitting discs.\u003c\/p\u003e","products":[{"product_id":"100mm-3mm-metal-cutting-disc","title":"100mm x 3mm Metal Cutting Disc (4\") — Abracs Depressed Centre","description":"\u003cp\u003e\u003cstrong\u003eAbracs 100mm x 3mm metal cutting disc\u003c\/strong\u003e with a depressed centre, for fast, straight cuts through mild steel, iron and sheet steel on a 4 inch angle grinder. The depressed centre keeps the grinder's locknut clear of the workpiece so you can cut flush or into tight angles. At 3mm thick this is the standard-duty disc — tougher and longer-lasting on repeated heavy cuts than a thin disc. For faster, cleaner cuts, or for work on stainless steel, see our 100mm extra thin cutting disc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e100mm x 3.0mm thick x 16mm bore (4 x 1\/8 x 5\/8\")\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003cbr\u003eAbracs Proflex\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003eAluminium oxide, resin bonded, fibreglass reinforced\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrade\u003c\/strong\u003e\u003cbr\u003eA30RBF\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003cbr\u003eManufactured to EN 12413, MPA certified\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum speed\u003c\/strong\u003e\u003cbr\u003e15,300 RPM \/ 80 m\/s\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003eCutting mild steel, iron, sheet steel and high-grade steel — steel bar, box section, angle iron, bolts, rebar and sheet metal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003e16mm (5\/8\") bore. Check your grinder takes a 5\/8\" arbor before ordering — some 100mm grinders are fitted for 22mm discs instead.\u003c\/p\u003e\n\u003cp\u003eAlso known as 4 inch cutting disc, 100mm chop disc, angle grinder cutting wheel or DPC cutting disc.\u003c\/p\u003e","brand":"DH \u0026 JS Trading Ltd","offers":[{"title":"100mm \/ 1","offer_id":57101068304762,"sku":"EMC1 x1","price":3.99,"currency_code":"GBP","in_stock":true},{"title":"100mm \/ 2","offer_id":57101068337530,"sku":"EMC1 x2","price":4.99,"currency_code":"GBP","in_stock":true},{"title":"100mm \/ 3","offer_id":57101068370298,"sku":"EMC1 x3","price":6.99,"currency_code":"GBP","in_stock":true},{"title":"100mm \/ 5","offer_id":57101068403066,"sku":"EMC1 x5","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"100mm \/ 10","offer_id":57101068435834,"sku":"EMC1 x10","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2239\/6850\/files\/3mmCuttingDiscs.jpg?v=1764940103"},{"product_id":"115mm-3mm-metal-cutting-disc","title":"115mm x 3mm Metal Cutting Disc (4.5\") — Abracs Depressed Centre","description":"\u003cp\u003e\u003cstrong\u003eAbracs 115mm x 3mm metal cutting disc\u003c\/strong\u003e with a depressed centre, for fast, straight cuts through mild steel, iron and sheet steel on a 4.5 inch angle grinder — the most common grinder size on site and in the workshop. The depressed centre keeps the grinder's locknut clear of the workpiece so you can cut flush or into tight angles. At 3mm thick this is the standard-duty disc — tougher and longer-lasting on repeated heavy cuts than a thin disc. For faster, cleaner cuts, or for work on stainless steel, see our 115mm extra thin INOX cutting disc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e115mm x 3.0mm thick x 22mm bore\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003cbr\u003eAbracs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003eAluminium oxide, resin bonded, fibreglass reinforced\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003cbr\u003eManufactured to EN 12413\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum speed\u003c\/strong\u003e\u003cbr\u003e13,200 RPM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003eCutting mild steel, iron, sheet steel and high-grade steel — steel bar, box section, angle iron, bolts, rebar and sheet metal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eStandard 22mm bore, fits most 4.5 inch angle grinders.\u003c\/p\u003e\n\u003cp\u003eAlso known as 4.5 inch cutting disc, 115mm chop disc, angle grinder cutting wheel or DPC cutting disc.\u003c\/p\u003e","brand":"DH \u0026 JS Trading Ltd","offers":[{"title":"115mm \/ 1","offer_id":57101245251962,"sku":"EMC2 x1","price":3.99,"currency_code":"GBP","in_stock":true},{"title":"115mm \/ 2","offer_id":57101245284730,"sku":"EMC2 x2","price":4.99,"currency_code":"GBP","in_stock":true},{"title":"115mm \/ 3","offer_id":57101245317498,"sku":"EMC2 x3","price":6.99,"currency_code":"GBP","in_stock":true},{"title":"115mm \/ 5","offer_id":57101245350266,"sku":"EMC2 x5","price":11.99,"currency_code":"GBP","in_stock":true},{"title":"115mm \/ 10","offer_id":57101245383034,"sku":"EMC2 x10","price":16.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2239\/6850\/files\/3mmCuttingDiscs.jpg?v=1764940103"},{"product_id":"125mm-3mm-metal-cutting-disc","title":"125mm x 3mm Metal Cutting Disc (5\") — Abracs Depressed Centre","description":"\u003cp\u003e\u003cstrong\u003eAbracs 125mm x 3mm metal cutting disc\u003c\/strong\u003e with a depressed centre, for fast, straight cuts through mild steel, iron and sheet steel on a 5 inch angle grinder. A step up in cutting depth from the 115mm disc, using the same 22mm bore. The depressed centre keeps the grinder's locknut clear of the workpiece so you can cut flush or into tight angles. At 3mm thick this is the standard-duty disc — tougher and longer-lasting on repeated heavy cuts than a thin disc. For faster, cleaner cuts, or for work on stainless steel, see our 125mm extra thin INOX cutting disc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e125mm x 3.0mm thick x 22mm bore\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003cbr\u003eAbracs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003eAluminium oxide, resin bonded, fibreglass reinforced\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003cbr\u003eManufactured to EN 12413\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum speed\u003c\/strong\u003e\u003cbr\u003e12,200 RPM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003eCutting mild steel, iron, sheet steel and high-grade steel — steel bar, box section, angle iron, bolts, rebar and sheet metal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eStandard 22mm bore, fits most 5 inch angle grinders.\u003c\/p\u003e\n\u003cp\u003eAlso known as 5 inch cutting disc, 125mm chop disc, angle grinder cutting wheel or DPC cutting disc.\u003c\/p\u003e","brand":"DH \u0026 JS Trading Ltd","offers":[{"title":"125mm \/ 1","offer_id":57101248135546,"sku":"EMC3 x1","price":4.29,"currency_code":"GBP","in_stock":true},{"title":"125mm \/ 2","offer_id":57101248168314,"sku":"EMC3 x2","price":5.49,"currency_code":"GBP","in_stock":true},{"title":"125mm \/ 3","offer_id":57101248201082,"sku":"EMC3 x3","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"125mm \/ 5","offer_id":57101248233850,"sku":"EMC3 x5","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"125mm \/ 10","offer_id":57101248266618,"sku":"EMC3 x10","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2239\/6850\/files\/3mmCuttingDiscs.jpg?v=1764940103"},{"product_id":"180mm-3mm-metal-cutting-disc","title":"180mm x 3mm Metal Cutting Disc (7\") — Abracs Depressed Centre","description":"\u003cp\u003e\u003cstrong\u003eAbracs 180mm x 3mm metal cutting disc\u003c\/strong\u003e with a depressed centre, for deep, straight cuts through mild steel, iron and sheet steel on a 7 inch angle grinder. The larger diameter gives the cutting depth for heavier stock than a 115mm or 125mm disc can reach. The depressed centre keeps the grinder's locknut clear of the workpiece so you can cut flush or into tight angles. At 3mm thick this is the standard-duty disc — tougher and longer-lasting on repeated heavy cuts than a thin disc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e180mm x 3.0mm thick x 22mm bore\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003cbr\u003eAbracs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003eAluminium oxide, resin bonded, fibreglass reinforced\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003cbr\u003eManufactured to EN 12413\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum speed\u003c\/strong\u003e\u003cbr\u003e8,600 RPM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003eCutting thicker steel stock — heavy box section, thick angle iron, steel plate, scaffold tube and rebar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eStandard 22mm bore, fits most 7 inch angle grinders.\u003c\/p\u003e\n\u003cp\u003eAlso known as 7 inch cutting disc, 180mm chop disc, angle grinder cutting wheel or DPC cutting disc.\u003c\/p\u003e","brand":"DH \u0026 JS Trading Ltd","offers":[{"title":"180mm \/ 1","offer_id":57101251150202,"sku":"EMC4 x1","price":4.99,"currency_code":"GBP","in_stock":true},{"title":"180mm \/ 2","offer_id":57101251182970,"sku":"EMC4 x2","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"180mm \/ 3","offer_id":57101251215738,"sku":"EMC4 x3","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"180mm \/ 5","offer_id":57101251248506,"sku":"EMC4 x5","price":15.99,"currency_code":"GBP","in_stock":true},{"title":"180mm \/ 10","offer_id":57101251281274,"sku":"EMC4 x10","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2239\/6850\/files\/3mmCuttingDiscs.jpg?v=1764940103"},{"product_id":"230mm-3mm-metal-cutting-disc","title":"230mm x 3mm Metal Cutting Disc (9\") — Abracs Depressed Centre","description":"\u003cp\u003e\u003cstrong\u003eAbracs 230mm x 3mm metal cutting disc\u003c\/strong\u003e with a depressed centre, for the deepest cuts through mild steel, iron and sheet steel on a 9 inch angle grinder — the largest disc in the range, for heavy fabrication and demolition cutting. The depressed centre keeps the grinder's locknut clear of the workpiece so you can cut flush or into tight angles. At 3mm thick this is the standard-duty disc — tougher and longer-lasting on repeated heavy cuts than a thin disc. For faster cuts, or for work on stainless steel, see our 230mm extra thin INOX cutting disc.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e230mm x 3.0mm thick x 22mm bore\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003cbr\u003eAbracs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003eAluminium oxide, resin bonded, fibreglass reinforced\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003cbr\u003eManufactured to EN 12413\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum speed\u003c\/strong\u003e\u003cbr\u003e6,600 RPM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003eHeavy cutting — steel plate, large box section, scaffold tube, railway and demolition work, and stock too deep for smaller grinders.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eStandard 22mm bore, fits most 9 inch angle grinders.\u003c\/p\u003e\n\u003cp\u003eAlso known as 9 inch cutting disc, 230mm chop disc, angle grinder cutting wheel or DPC cutting disc.\u003c\/p\u003e","brand":"DH \u0026 JS Trading Ltd","offers":[{"title":"230mm \/ 1","offer_id":57101253181818,"sku":"EMC5 x1","price":5.99,"currency_code":"GBP","in_stock":true},{"title":"230mm \/ 2","offer_id":57101253214586,"sku":"EMC5 x2","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"230mm \/ 3","offer_id":57101253247354,"sku":"EMC5 x3","price":13.99,"currency_code":"GBP","in_stock":true},{"title":"230mm \/ 5","offer_id":57101253280122,"sku":"EMC5 x5","price":18.99,"currency_code":"GBP","in_stock":true},{"title":"230mm \/ 10","offer_id":57101253312890,"sku":"EMC5 x10","price":31.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2239\/6850\/files\/3mmCuttingDiscs.jpg?v=1764940103"},{"product_id":"100mm-1mm-extra-thin-cutting-disc","title":"100mm x 1mm Extra Thin Metal Cutting Disc (4\") — Abracs","description":"\u003cp\u003e\u003cstrong\u003eAbracs 100mm x 1mm extra thin cutting disc\u003c\/strong\u003e for fast, clean cuts through steel on a 4 inch angle grinder. At 1mm thick the disc slices rather than grinds its way through — it removes far less material, cuts with much less effort and generates less heat, so edges come away cleaner with minimal burr and less discolouration. Wears faster than a 3mm disc, so most workshops keep both: this for speed and finish, our 3mm depressed centre discs for heavy repeated cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e100mm x 1.0mm thick x 16mm bore (4\")\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003cbr\u003eAbracs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003eAluminium oxide, resin bonded, fibreglass reinforced\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003cbr\u003eManufactured to EN 12413\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum speed\u003c\/strong\u003e\u003cbr\u003e15,200 RPM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003eCutting thin steel stock, tube, box section, sheet metal, threaded bar, bolts and studding — anywhere a clean edge and minimal burr matter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003e16mm bore. Check your grinder takes a 16mm arbor before ordering — some 100mm grinders are fitted for 22mm discs instead.\u003c\/p\u003e\n\u003cp\u003eAlso known as 4 inch thin cutting disc, ultra thin cutting disc, slitting disc or 100mm cut-off wheel.\u003c\/p\u003e","brand":"DH \u0026 JS Trading Ltd","offers":[{"title":"100mm \/ 1","offer_id":57101275595130,"sku":"EMC10 x1","price":4.99,"currency_code":"GBP","in_stock":true},{"title":"100mm \/ 2","offer_id":57101275627898,"sku":"EMC10 x2","price":6.99,"currency_code":"GBP","in_stock":true},{"title":"100mm \/ 3","offer_id":57101275660666,"sku":"EMC10 x3","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"100mm \/ 5","offer_id":57101275693434,"sku":"EMC10 x5","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"100mm \/ 10","offer_id":57101275726202,"sku":"EMC10 x10","price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2239\/6850\/files\/ExtraThinMetalCuttingDiscs.jpg?v=1764940844"},{"product_id":"115mm-1mm-inox-stainless-steel-cutting-disc","title":"115mm x 1mm Stainless Steel \u0026 Metal Cutting Disc (4.5\") — Abracs Proflex INOX","description":"\u003cp\u003e\u003cstrong\u003eAbracs Proflex 115mm x 1mm INOX cutting disc\u003c\/strong\u003e for fast, clean cuts through stainless steel and mild steel on a 4.5 inch angle grinder — the most popular size and thickness combination on site and in the workshop. At 1mm thick the disc slices rather than grinds its way through: it removes far less material, cuts with much less effort and generates less heat, so edges come away cleaner with minimal burr and less discolouration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStainless steel safe\u003c\/strong\u003e\u003cbr\u003eContains no iron, sulphur or chlorine, so the disc will not contaminate stainless steel and cause it to rust after cutting. Suitable for use in the petrochemical, nuclear and food industries where contamination control matters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e115mm x 1.0mm thick x 22mm bore (4.5\")\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003cbr\u003eAbracs Proflex\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrade\u003c\/strong\u003e\u003cbr\u003eA60TBF\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003eAluminium oxide, resin bonded, fibreglass reinforced\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003cbr\u003eManufactured to EN 12413\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum speed\u003c\/strong\u003e\u003cbr\u003e13,300 RPM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003eCutting stainless steel, mild steel, tube, box section, sheet metal, threaded bar, bolts and studding — anywhere a clean, contamination-free edge matters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eStandard 22mm bore, fits most 4.5 inch angle grinders.\u003c\/p\u003e\n\u003cp\u003eAlso known as inox cutting disc, stainless steel cutting disc, 4.5 inch thin cutting disc, slitting disc or 115mm cut-off wheel.\u003c\/p\u003e","brand":"DH \u0026 JS Trading Ltd","offers":[{"title":"115mm \/ 1","offer_id":57101277331834,"sku":"EMC11 x1","price":4.49,"currency_code":"GBP","in_stock":true},{"title":"115mm \/ 2","offer_id":57101277364602,"sku":"EMC11 x2","price":5.99,"currency_code":"GBP","in_stock":true},{"title":"115mm \/ 3","offer_id":57101277397370,"sku":"EMC11 x3","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"115mm \/ 5","offer_id":57101277430138,"sku":"EMC11 x5","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"115mm \/ 10","offer_id":57101277462906,"sku":"EMC11 x10","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2239\/6850\/files\/ExtraThinMetalCuttingDiscs.jpg?v=1764940844"},{"product_id":"125mm-1mm-inox-stainless-steel-cutting-disc","title":"125mm x 1mm Stainless Steel \u0026 Metal Cutting Disc (5\") — Abracs Proflex INOX","description":"\u003cp\u003e\u003cstrong\u003eAbracs Proflex 125mm x 1mm INOX cutting disc\u003c\/strong\u003e for fast, clean cuts through stainless steel and mild steel on a 5 inch angle grinder, giving a little more cutting depth than the 115mm on the same bore. At 1mm thick the disc slices rather than grinds its way through: it removes far less material, cuts with much less effort and generates less heat, so edges come away cleaner with minimal burr and less discolouration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStainless steel safe\u003c\/strong\u003e\u003cbr\u003eContains no iron, sulphur or chlorine, so the disc will not contaminate stainless steel and cause it to rust after cutting. Suitable for use in the petrochemical, nuclear and food industries where contamination control matters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e125mm x 1.0mm thick x 22.23mm bore (5\")\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003cbr\u003eAbracs Proflex\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrade\u003c\/strong\u003e\u003cbr\u003eA60TBF\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003eAluminium oxide, resin bonded, fibreglass reinforced\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003cbr\u003eManufactured to EN 12413\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum speed\u003c\/strong\u003e\u003cbr\u003e12,200 RPM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003eCutting stainless steel, mild steel, tube, box section, sheet metal, threaded bar, bolts and studding — anywhere a clean, contamination-free edge matters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eStandard 22.23mm bore, fits most 5 inch angle grinders.\u003c\/p\u003e\n\u003cp\u003eAlso known as inox cutting disc, stainless steel cutting disc, 5 inch thin cutting disc, slitting disc or 125mm cut-off wheel.\u003c\/p\u003e","brand":"DH \u0026 JS Trading Ltd","offers":[{"title":"125mm \/ 1","offer_id":57101278577018,"sku":"EMC12 x1","price":4.49,"currency_code":"GBP","in_stock":true},{"title":"125mm \/ 2","offer_id":57101278609786,"sku":"EMC12 x2","price":5.99,"currency_code":"GBP","in_stock":true},{"title":"125mm \/ 3","offer_id":57101278642554,"sku":"EMC12 x3","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"125mm \/ 5","offer_id":57101278675322,"sku":"EMC12 x5","price":12.99,"currency_code":"GBP","in_stock":true},{"title":"125mm \/ 10","offer_id":57101278708090,"sku":"EMC12 x10","price":18.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2239\/6850\/files\/ExtraThinMetalCuttingDiscs.jpg?v=1764940844"},{"product_id":"230mm-1-8mm-inox-stainless-steel-cutting-disc","title":"230mm x 1.8mm Stainless Steel \u0026 Metal Cutting Disc (9\") — Abracs Proflex INOX","description":"\u003cp\u003e\u003cstrong\u003eAbracs Proflex 230mm x 1.8mm INOX cutting disc\u003c\/strong\u003e for fast, deep cuts through stainless steel and mild steel on a 9 inch angle grinder. At 1.8mm it is a little thicker than the 1mm discs in the smaller sizes — the extra body is what lets a disc this large run safely at full diameter — but it still cuts far faster and with less effort than a 3mm disc, removing less material and leaving a cleaner edge with minimal burr.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStainless steel safe\u003c\/strong\u003e\u003cbr\u003eContains no iron, sulphur or chlorine, so the disc will not contaminate stainless steel and cause it to rust after cutting. Suitable for use in the petrochemical, nuclear and food industries where contamination control matters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e230mm x 1.8mm thick x 22mm bore (9\")\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003cbr\u003eAbracs Proflex\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGrade\u003c\/strong\u003e\u003cbr\u003eA60TBF\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction\u003c\/strong\u003e\u003cbr\u003eAluminium oxide, resin bonded, fibreglass reinforced\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandard\u003c\/strong\u003e\u003cbr\u003eManufactured to EN 12413\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum speed\u003c\/strong\u003e\u003cbr\u003e6,600 RPM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003eCutting stainless and mild steel plate, large box section, scaffold tube and heavy stock where a clean, contamination-free edge and a fast cut matter more than disc life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003eStandard 22mm bore, fits most 9 inch angle grinders.\u003c\/p\u003e\n\u003cp\u003eAlso known as inox cutting disc, stainless steel cutting disc, 9 inch thin cutting disc, slitting disc or 230mm cut-off wheel.\u003c\/p\u003e","brand":"DH \u0026 JS Trading Ltd","offers":[{"title":"230mm \/ 1","offer_id":57101281329530,"sku":"EMC13 x1","price":5.99,"currency_code":"GBP","in_stock":true},{"title":"230mm \/ 2","offer_id":57101281362298,"sku":"EMC13 x2","price":8.99,"currency_code":"GBP","in_stock":true},{"title":"230mm \/ 3","offer_id":57101281395066,"sku":"EMC13 x3","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"230mm \/ 5","offer_id":57101281427834,"sku":"EMC13 x5","price":19.99,"currency_code":"GBP","in_stock":true},{"title":"230mm \/ 10","offer_id":57101281460602,"sku":"EMC13 x10","price":32.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2239\/6850\/files\/ExtraThinMetalCuttingDiscs.jpg?v=1764940844"},{"product_id":"75mm-1mm-mini-cut-off-wheel","title":"75mm x 1mm Mini Cut-Off Wheel (3\") — Stainless \u0026 Metal, 10mm Bore","description":"\u003cp\u003e\u003cstrong\u003eAbracs 75mm x 1mm mini cut-off wheel\u003c\/strong\u003e for air cut-off tools and mini angle grinders, suitable for stainless steel and mild steel. The thinnest wheel in the range and the fastest cutting — it removes the least material, needs the least effort and generates the least heat, leaving a clean edge with minimal burr. Best where precision matters more than wheel life: thin sheet, tube, and cuts you want to place accurately. Step up to 1.6mm or 2mm if you are cutting heavier stock or want the wheel to last longer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e75mm x 1.0mm thick x 10mm bore (3\")\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003cbr\u003eAbracs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003cbr\u003eStainless steel and mild steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfile\u003c\/strong\u003e\u003cbr\u003eFlat, no depressed centre\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum speed\u003c\/strong\u003e\u003cbr\u003e20,100 RPM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003e10mm bore. Suits air cut-off tools, mini angle grinders and die grinders with a 10mm mandrel. For best wheel life use with a high-speed air tool with a 1\/4\" chuck or larger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003eCutting bolts and studding, vehicle body panels, light sheet metal, exhausts, brackets and clips — and any cut in a confined space a full-size grinder cannot reach.\u003c\/p\u003e\n\u003cp\u003eAlso known as 3 inch cutting disc, air cut-off tool disc, mini cutting disc, stainless steel cutting disc, 75mm slitting disc or mini angle grinder disc.\u003c\/p\u003e","brand":"DH \u0026 JS Trading Ltd","offers":[{"title":"75 x 1 x 10mm \/ 1","offer_id":57101288112506,"sku":"EMC7 x1","price":3.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 1 x 10mm \/ 2","offer_id":57101288145274,"sku":"EMC7 x2","price":5.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 1 x 10mm \/ 3","offer_id":57101288178042,"sku":"EMC7 x3","price":6.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 1 x 10mm \/ 5","offer_id":57101288210810,"sku":"EMC7 x5","price":9.49,"currency_code":"GBP","in_stock":true},{"title":"75 x 1 x 10mm \/ 10","offer_id":57101288243578,"sku":"EMC7 x10","price":15.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2239\/6850\/files\/Extrathincuttingdiscs_830ef867-c1a2-4af4-b646-b32b15681961.jpg?v=1764940687"},{"product_id":"75mm-1-6mm-mini-cut-off-wheel","title":"75mm x 1.6mm Mini Cut-Off Wheel (3\") — Stainless \u0026 Metal, 10mm Bore","description":"\u003cp\u003e\u003cstrong\u003eAbracs 75mm x 1.6mm mini cut-off wheel\u003c\/strong\u003e for air cut-off tools and mini angle grinders, suitable for stainless steel and mild steel. The middle thickness in the range and the usual first choice — it still cuts quickly and cleanly, but carries enough body to stand up to general workshop use without wearing through as fast as a 1mm wheel. The one to stock if you are only stocking one.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e75mm x 1.6mm thick x 10mm bore (3\")\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003cbr\u003eAbracs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003cbr\u003eStainless steel and mild steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfile\u003c\/strong\u003e\u003cbr\u003eFlat, no depressed centre\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum speed\u003c\/strong\u003e\u003cbr\u003e20,100 RPM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003e10mm bore. Suits air cut-off tools, mini angle grinders and die grinders with a 10mm mandrel. For best wheel life use with a high-speed air tool with a 1\/4\" chuck or larger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003eCutting bolts and studding, vehicle body panels, sheet metal, exhausts, brackets and clips — and any cut in a confined space a full-size grinder cannot reach.\u003c\/p\u003e\n\u003cp\u003eAlso known as 3 inch cutting disc, air cut-off tool disc, mini cutting disc, stainless steel cutting disc, 75mm slitting disc or mini angle grinder disc.\u003c\/p\u003e","brand":"DH \u0026 JS Trading Ltd","offers":[{"title":"75 x 1.6 x 10mm \/ 1","offer_id":57101288767866,"sku":"EMC8 x1","price":3.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 1.6 x 10mm \/ 2","offer_id":57101288800634,"sku":"EMC8 x2","price":5.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 1.6 x 10mm \/ 3","offer_id":57101288833402,"sku":"EMC8 x3","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 1.6 x 10mm \/ 5","offer_id":57101288866170,"sku":"EMC8 x5","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 1.6 x 10mm \/ 10","offer_id":57101288898938,"sku":"EMC8 x10","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2239\/6850\/files\/Extrathincuttingdiscs_830ef867-c1a2-4af4-b646-b32b15681961.jpg?v=1764940687"},{"product_id":"75mm-2mm-mini-cut-off-wheel","title":"75mm x 2mm Mini Cut-Off Wheel (3\") — Stainless \u0026 Metal, 10mm Bore","description":"\u003cp\u003e\u003cstrong\u003eAbracs 75mm x 2mm mini cut-off wheel\u003c\/strong\u003e for air cut-off tools and mini angle grinders, suitable for stainless steel and mild steel. The thickest wheel in the range and the longest lasting — it cuts a little slower than the thinner wheels and takes out more material, but stands up to heavier, more aggressive cutting and repeated use. Best on thicker stock, rusted or seized fixings, and jobs where you would otherwise get through several thin wheels.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize\u003c\/strong\u003e\u003cbr\u003e75mm x 2.0mm thick x 10mm bore (3\")\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003cbr\u003eAbracs\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003cbr\u003eStainless steel and mild steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProfile\u003c\/strong\u003e\u003cbr\u003eFlat, no depressed centre\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum speed\u003c\/strong\u003e\u003cbr\u003e20,100 RPM\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits\u003c\/strong\u003e\u003cbr\u003e10mm bore. Suits air cut-off tools, mini angle grinders and die grinders with a 10mm mandrel. For best wheel life use with a high-speed air tool with a 1\/4\" chuck or larger.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUses\u003c\/strong\u003e\u003cbr\u003eCutting seized and rusted bolts, studding, thicker brackets, exhaust sections and vehicle body work — and any cut in a confined space a full-size grinder cannot reach.\u003c\/p\u003e\n\u003cp\u003eAlso known as 3 inch cutting disc, air cut-off tool disc, mini cutting disc, stainless steel cutting disc, 75mm slitting disc or mini angle grinder disc.\u003c\/p\u003e","brand":"DH \u0026 JS Trading Ltd","offers":[{"title":"75 x 1 x 10mm \/ 1","offer_id":57101289259386,"sku":"EMC7 x1","price":3.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 1 x 10mm \/ 2","offer_id":57101289292154,"sku":"EMC7 x2","price":5.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 1 x 10mm \/ 3","offer_id":57101289324922,"sku":"EMC7 x3","price":6.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 1 x 10mm \/ 5","offer_id":57101289357690,"sku":"EMC7 x5","price":9.49,"currency_code":"GBP","in_stock":true},{"title":"75 x 1 x 10mm \/ 10","offer_id":57101289390458,"sku":"EMC7 x10","price":15.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 1.6 x 10mm \/ 1","offer_id":57101289423226,"sku":"EMC8 x1","price":3.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 1.6 x 10mm \/ 2","offer_id":57101289455994,"sku":"EMC8 x2","price":5.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 1.6 x 10mm \/ 3","offer_id":57101289488762,"sku":"EMC8 x3","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 1.6 x 10mm \/ 5","offer_id":57101289521530,"sku":"EMC8 x5","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 1.6 x 10mm \/ 10","offer_id":57101289554298,"sku":"EMC8 x10","price":19.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 2 x 10mm \/ 1","offer_id":57101289587066,"sku":"EMC9 x1","price":3.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 2 x 10mm \/ 2","offer_id":57101289619834,"sku":"EMC9 x2","price":5.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 2 x 10mm \/ 3","offer_id":57101289652602,"sku":"EMC9 x3","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 2 x 10mm \/ 5","offer_id":57101289685370,"sku":"EMC9 x5","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"75 x 2 x 10mm \/ 10","offer_id":57101289718138,"sku":"EMC9 x10","price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0609\/2239\/6850\/files\/Extrathincuttingdiscs_830ef867-c1a2-4af4-b646-b32b15681961.jpg?v=1764940687"}],"url":"https:\/\/www.dhjstrading.com\/collections\/cutting-discs.oembed","provider":"DH \u0026 JS Trading Ltd","version":"1.0","type":"link"}